I have chosen speaker but the box, speaker, port models are not displayed in the "3D" tab. What is a trouble?
Most likely you not specified all required parameters:
- For box displaying you must specify its bound box dimensions and material thickness in the "Box" tab.
- For speaker(s) displaying you must specify cutout diameter and mounting depth in the "Box" tab (magnet diameter is not required and if you did not specify its then program set diameter equals to 1/3 of the speaker diameter)
- For port(s) displaying you must specify its dimensions in the "Port" tab, also port material thickness in the "Box" tab.
If you do all above but models still not displayed you need to write to us, maybe it's a bug.
To simplify, the outside dimensions of your box and the dimensions of your port have to make sense in order to be displayed by the 3D model.
Speakers: (2) 12 Inch Skar Audio EVL
Material Thickness: .75 inches
Box Dimensions: (Height) 15 inches, (Wide) 20 inches, (Length) 40 inches
Port Dimensions: (Height) 13.5 inches, (Wide) 2 inches, (Length) 26 inches
After the entries are made, and you want to see the virtual production, under the 3D tab you have to select OBJECTS tab, to add piece(s) to the blank screen below. Start with the box. The box will visualize in the 3-D field below. Now that you can see box, start adding the ports, chambers, sub(s) etc. When you select a piece to add to the box, the software wants to know where or which side that piece is to be added. As you add them you can drag/drop them.